51 Tooth Belt-To-Chain Drive Conversion 5-Spoke Rear Chrome Sprocket with 9.8MM

  
51 Tooth Belt-To-Chain Drive Conversion 5-Spoke Rear Chrome Sprocket with 9.8MM Offset for 2000+ Harley Sportster & Big Twin Softail, Dyna & Touring Models - Recommended for a 530 Chain - 2-1/4 ID. This sprocket has a 9.8mm offset Offset is measured from the sprocket bolt mount surface to the center line of the teeth. The inner diameter of the center hole is 2-1/4.

Fits MANY 2000+ Harley Sportster & Big Twin models using a 530 chain. If your bike is stock, you still may need to double check the offset against the front sprocket. We also offer 48 Tooth rear sprockets as well as full conversion kits with a front sprocket and chain. NOTE: Remember a larger rear sprocket means more torque (geared down) and a larger front sprocket means more top end (taller gearing).

NOTE: Because of tight clearance when using stock muffler mount or stock passenger peg mounts do not use an O-ring chain because the additional width may cause chain to wear at these components on deceleration. The inner diameter of the center hole is 2-1/4 Fits MANY 2000+ Harley Sportster & Big Twin models using a 530 chain. 12 x 10 x 6 inches. Product Dimensions: 10.0 inches x 12.0 inches x 6.0 inches. We reserve the right to cancel any order for any reason at any time.

We are not responsible for undeliverable addresses. All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications.

We will work with you to resolve any problem you may have.